Rooftop solar

Cut daytime electricity costs with rooftop solar

Factories, warehouses, offices and shops use most power in daytime — exactly when solar produces. Estimate first, then get a free assessment.

Daytime outputMatches daytime factory load
Net meteringExport surplus (conditions apply)
Hybrid optionBackup with batteries
Free assessmentInitial review, no obligation

How rooftop solar works

Panels make DC power in daylight; the inverter turns it into AC for the building. A hybrid stores surplus in a battery; on-grid sends it to the grid through the net meter.

How rooftop solar works Sunlight makes power in the panels, the inverter converts it for the building; a hybrid stores some in a battery; surplus goes to the grid through the net meter. Solar panels Inverter DC → AC Your factory / building Battery hybrid only Net meter ⇅ Grid DC AC

Solution types

Final size and cost are set after the assessment and site survey. These types give you a starting point.

5 kWp on-grid

For small offices, shops, SMEs or suitable homes. Daytime power from solar, the rest from the grid.

Discuss this →

5 kWp hybrid

Solar + battery + grid, for those who need backup as well as savings.

Discuss this →

20 kWp on-grid + net metering

For commercial buildings and small to medium factories.

Discuss this →

20 kWp+ custom

For large factories, warehouses and industry — designed from a site survey and consumption analysis.

Discuss this →

How a solar project usually moves forward

With us, it starts with a free initial assessment. The next steps are agreed after looking at your site and needs.

  1. Understand your use

    Review bills, sanctioned load and daytime use.

  2. Site survey

    Check roof area, condition, shading and electrical setup.

  3. Design and quotation

    Right-sized system, equipment and a written quotation.

  4. Installation, net metering and care

    Installation, net metering application where applicable, then monitoring and maintenance.

Net metering in brief

  1. Daytime

    Solar power runs your equipment first. Any surplus flows through the meter to the grid (export).

  2. Evening and night

    Solar is off, so you draw from the grid (import) — or from the battery first if hybrid.

  3. Month end

    The meter records both directions. Your bill offsets export against import — at the guideline's rate and conditions.

  • The Net Metering Guideline 2025 was published under the Power Division's National Rooftop Solar Program.
  • Eligible LT, MT, HT and EHT customer categories can take part, subject to conditions.
  • You apply online, followed by a site inspection and approval.
  • Panels and inverters must meet the approved standards.

Rates and conditions can change. Check the latest Power Division guideline before deciding — we help with this during the assessment.

Greater Dhaka industrial areas

  • Gazipur
  • Tongi
  • Konabari
  • Sreepur
  • Savar
  • Ashulia
  • Fatullah
  • Siddhirganj
  • Kanchpur
  • Rupganj
  • Tejgaon
  • Keraniganj
  • Uttara

Free solar assessment

Find out if solar suits you

Share a few details — our team will do an initial review and contact you about the next step (site survey and quotation). You can send a photo of your bill on WhatsApp afterwards.

Want to estimate first? →

Free solar assessment

e.g. 01710-502834

We use your details only to get back to you. Privacy policy

Solar FAQ

What is net metering?

You use the power from your rooftop first and export the surplus to the grid, which is adjusted in your bill. Under the Power Division's net metering guideline, eligible customer categories can join through an online application, site inspection and approval. Rates and conditions can change.

How much does solar cost?

It depends on size, type (on-grid or hybrid), battery, roof condition and equipment. A written quotation follows the assessment and site visit.

How much roof space is needed?

For planning we assume roughly 100 sq ft of open roof per kWp, including walkways. Shade, structure and orientation are checked in the site survey.

Will solar work during a power cut?

On-grid systems switch off when the grid is down, for safety. To keep running during power cuts you need a hybrid system with batteries.

Can homes request an assessment too?

Yes. Our main focus is factories and commercial buildings, but homes are welcome to apply too.